Heavy duty actuators

Home / Valve Automation System / Actuators / Heavy duty actuators

Heavy duty actuators


Product Features Download

– Double acting torque – 63 Nm to 808626 Nm

– Rack & pinion construction, male shaft delivering torques from 200 Nm to 20720 Nm

– Maximum morking pressure 10 bar, contact us for higher pressure

– Life more than 1 million cycles.

– Gr.III epoxy coated spring for high corrosion resistance.

– Additional lubrication is not necessary.

– Unique spring retainer construction.

– Pinion supported on ball bearings.

– Temperature range: NBR -20 °C to + 80 °CPE -20 °C to + 125 °C

– Can be converted to single acting by just adding spring module kit.

– SIL3 capable

– End stroke: +/- 10 degree

 

DRS series scotch yoke actuators

Product Features Download

– Double acting torque – 63 Nm to 808626 Nm

– Single acting torque – 17 Nm to 671957 Nm

– Heavy duty, high performance design, with female shaft drive.

– X seals and V seals for low wear and tear, each with grease retaining groove.

– Yoke supported on life time lubricated ball bearings.

– Internal tie rod to avoid corrosion and improve safety.

– Non buckling, lifetime lubricated, epoxy coated springs.

– Conversion from fail close to fail open possible by just interchanging spring and pneumatic modules.

– Internally mounted hydraulic override.

– Optional overrides: Mechanical override (SWH) / Hydaulic override (HMOR/MIBH)

– Easy to convert from double acting to single acting.

– Temperature range: NBR -20 °C to + 80 °C, Viton -20 °C to +125 °CEPDM -30 °C to +110 °C, Fluorosilicone -60 °C to +110 °C

– SIL3 capable

– End stroke: +/- 10 degree

 

Product Features Download

– Double acting torque – 63 Nm to 808626 Nm

– Rack & pinion construction, male shaft delivering torques from 200 Nm to 20720 Nm

– Maximum morking pressure 10 bar, contact us for higher pressure

– Life more than 1 million cycles.

– Gr.III epoxy coated spring for high corrosion resistance.

– Additional lubrication is not necessary.

– Unique spring retainer construction.

– Pinion supported on ball bearings.

– Temperature range: NBR -20 °C to + 80 °CPE -20 °C to + 125 °C

– Can be converted to single acting by just adding spring module kit.

– SIL3 capable

– End stroke: +/- 10 degree

 

DRS series scotch yoke actuators

Product Features Download

– Double acting torque – 63 Nm to 808626 Nm

– Single acting torque – 17 Nm to 671957 Nm

– Heavy duty, high performance design, with female shaft drive.

– X seals and V seals for low wear and tear, each with grease retaining groove.

– Yoke supported on life time lubricated ball bearings.

– Internal tie rod to avoid corrosion and improve safety.

– Non buckling, lifetime lubricated, epoxy coated springs.

– Conversion from fail close to fail open possible by just interchanging spring and pneumatic modules.

– Internally mounted hydraulic override.

– Optional overrides: Mechanical override (SWH) / Hydaulic override (HMOR/MIBH)

– Easy to convert from double acting to single acting.

– Temperature range: NBR -20 °C to + 80 °C, Viton -20 °C to +125 °CEPDM -30 °C to +110 °C, Fluorosilicone -60 °C to +110 °C

– SIL3 capable

– End stroke: +/- 10 degree